Talk to us
MultiPoles are made from SED, Uglie, and UniLog poles. These are high quality Radiata pine logs that have been sourced from sustainable forests using responsible logging contractors.
To make these logs into MultiPoles, most of the heartwood core is removed through a specialised process. This process is a first for New Zealand and possibly even for the world!
• Debarked instead of peeled. A stronger pole due to less removal of the cambium layer.
• 6% stronger than a SED Pole
• The Uglie’s rough finish makes it an ideal pole for foundations where skin friction is important.
• An economical option
• Naturally tapered: 6mm / m
• Diameter range: 150mm to 550mm
• Length range: 1.8m to 22m
• The log’s natural taper is removed, resulting in a constant diameter and even finish.
• Ideal for level applications, or situations where the pole will remain visible.
• MultiPole UniLog poles can be used as bearers for a timber floor.
• The UniLog is also used to make the MultiPole UniLog Grooved Bearer, a specialised bearer product. This type of bearer has grooves machined into it to receive a concrete tray deck.
• As bearers and beams, MultiPole UniLog poles are significantly stronger than equivalent sized sawn timber.
• Diameter range: 225mm–400mm
• Length range: 1.8m–12m
• Pole with a machine-peeled finish
• Each SED pole is carefully graded and selected for straightness, even taper, regular sizing, and consistent quality.
• Naturally tapered: 6mm / m
• Diameter range: 150mm to 550mm
• Length range: 1.8m to 22m
MultiPoles can be installed by pile driving, drilling and concreting, or vibrating (with or without hydro jetting). Because MultiPoles are lightweight, compared to steel or concrete products, they are easily transported and handled on site. An authorised installer may be recommended for particular sites.
CLL Service & Solutions – CFA (Continuous Flight Auger) piling system.